1. PRODUCT IDENTIFICATION
1. PRODUCT IDENTIFICATION
| Product Name : | Oberon F232 ISO 220 |
| UN Proper Shipping Name : | None allocated |
| Other Names : | None listed |
| Product Use : | Equipment lubricant in processing food and food support products. |
| CHEMTREC, 24-HOUR EMERGENCY TELEPHONE NUMBER | |
| 1-800-424-9300 (Toll-free) | For United States and Canada |
| 1-703-527-3887 | In the event of an incident occurring outside United States and Canada |
2. HAZARDS INDENTIFICATION
| NOHSC Classification | Not classified as hazardous according to criteria of NOHSC. |
| Dangerous Goods Classification |
Not classified as a Dangerous Goods
according to the Code for the Transport of Dangerous Goods by Road and
Rail. Note: Combustible materials may be classified as Class 9: miscellaneous dangerous goods if transported with flammable materials. |
| SUSDP Classification | Not Scheduled |
| Risk Phrases | None |
| Safety Phrases | None |
3. COMPOSITION/INFORMATION ON INGREDIENTS
| NAME | CAS NUMBER | PROPORTION | RISK PHRASES |
| 1-Decene, homopolymer, hydrogenated |
68037-01-4 |
> 60% |
- |
| Polyisobutene |
9003-27-4 |
10 to 30% |
- |
| Other ingredients determined not to be hazardous |
Note (1) |
< 10% |
- |
Note (1) : Listed on US TSCA and US FDA approved for incidental food contact
4. FIRST AID MEASURES
| Swallowed | DO NOT induce vomiting. Immediately wash out mouth with water, and then give plenty of water to drink. Seek medical attention. |
| Eye | Rinse eyes immediately with water for at least 15 minutes. In case of irritation, seek medical advice. |
| Skin | Remove all contaminated clothing. Wash gently and thoroughly with water and non-abrasive soap. Ensure contaminated clothing is washed before re-use or discard. If irritation develops and persists, seek medical attention. |
| Inhaled | Remove the patient to fresh air. Ensure airways are clear and have qualified person give oxygen through a facemask if breathing is difficult. If irritation develops, seek medical attention. |
| First Aid Facilities | No special facilities required. |
| Advice to Doctor | Treat symptomatically |
5. FIRE FIGHTING MEASURES
| Fire/Explosion Hazard | Classified as C2 (Combustible liquid). |
| Extinguishing Media | Use water as fog or spray to cool fire exposed containers. Do not use direct stream of water; product will float, possibly re-igniting. |
| Fire Fighting | Self-Contained Breathing Apparatus (SCBA) and full protective clothing should be worn. |
| Flash Point | > 200 oC (COC) |
| Hazchem Code | None allocated |
| Hazards from Combustion Products | Oxides of carbon. |
6. ACCIDENTAL RELEASE MEASURES
| Spills Procedure |
SMALL – 20 LITRES OR LESS Soak up with inert oil absorbent. Arrange for disposal through an approved facility. LARGE – GREATER THAN 20 LITRES Remove all sources of ignition. Increase ventilation. Evacuate all unnecessary personnel. Wear full protective equipment and clothing to minimise exposure. If possible contain the spill. Place inert absorbent material such as vermiculite, sand or dirt onto spillage. Use clean non-sparking tools to collect the materials and place into a suitable labelled container. If large quantities of this material enter the waterways contact the Environmental Protection Authority or your local Waste Management Authority. |
7. HANDLING AND STORAGE
| Handling |
Repeated or prolonged contact with this
material should be avoided in order to lessen the possibility of skin
disorders. It is essential that all who come into contact, maintain high
standards of personal hygiene ie. washing hands prior to eating,
drinking or going to the toilet. Build-up of mists in the working
atmosphere must be prevented. Misuse of empty containers can be hazardous. Do not cut, weld, heat or drill containers. Residue may ignite with explosive violence if heated sufficiently. Do not pressurise or expose to open flame or heat. Keep container closed and bung in place. |
| Storage Precautions | Classified as a combustible substance for storage and handling purposes. Store in a cool, dry, well-ventilated area, out of direct sunlight. Avoid sparks, flames, and other ignition sources. Store away from incompatible materials such as materials that support combustion (oxidising materials). Reference should be made to the storage and handling of flammable and combustible liquids. |
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
| Exposure Limits |
No value assigned for this specific
material by the National Occupational Health and Safety Commission (NOHSC).
However, ACGIH TLV (Threshold Limit Values) for constituents is listed
below. SUBSTANCE TWA STEL
ppm mg/m3 ppm mg/m3 1-Decene, homopolymer, hydrogenated - 5 - 10 TLV's are not standards, they are guidelines designed for use by industrial hygienists in making decisions regarding safe levels of exposure. Users are cautioned that the TLV's are only one of multiple factors to be considered in evaluating specific workplace situations and conditions. [TWA = time-weighted average; STEL = short-term exposure limit]. |
| Biological Limit Values | No biological limit allocated. |
| Engineering Control | The use of mechanical dilution ventilation is recommended whenever this product is used in a confined space, is heated above ambient temperatures or otherwise to maintain ambient concentration below the recommended threshold exposure limits. |
| Respirator Type | Avoid breathing vapours or mists. Select and use respirators in accordance with AS/NZS 1715/1716. When vapours are generated, the used of the following is recommended: Half face piece respirator with dust/mist filters. The appropriate filter capacity and respirator type will depend on exposure levels encountered. |
| Eye Protection | Chemical safety goggles are recommended. If handled hot, a full face shield should be worn. |
| Glove Type | Use of impervious rubber gloves is recommended. |
| Clothing | Clothing should be suitable to avoid product contacting the skin on a prolonged or repeated basis. |
9. PHYSICAL AND CHEMICAL PROPERTIES:
| Appearance | Clear liquid |
| Odour | Negligible |
| Melting Point (oC) | Not available |
| Boiling Point (oC) | Not available |
| Vapour Pressure | Not available |
| Vapour Density | Not available |
| pH | Not applicable |
| Specific Gravity | Approximately 0.85 g/m3 |
| Flashpoint (oC) | > 200 oC (COC) |
| Flamm. Limit LEL | Not available |
| Flamm. Limit UEL | Not available |
| Solubility in Water | < 0.1 g/l |
|
Other Properties |
|
| Viscosity @ 40 oC | Approx. 220 mm2/s |
10. STABILITY AND REACTIVITY
| Stability | Stable under normal conditions of storage and handling. |
| Conditions to Avoid | None allocated. |
| Incompatible Materials | Strong oxidising agents. |
| Hazardous Decomposition Products | Oxides of carbon. |
| Hazardous Reactions | No hazardous polymerisation will occur. |
11. TOXICOLOGICAL INFOMATION
| Toxicology | No toxicological data available for this product. |
| Acute - Swallowed | Small amounts of liquid aspirated into the respiratory system during ingestion or from vomiting may cause bronchopneumonia or pulmonary edema. |
| Acute - Eye | Will cause eye discomfort, but will not injure eye tissue. |
| Acute - Skin | Prolonged or frequent contact may cause skin irritation or cracking to sensitive skins. |
| Acute - Inhaled: | Vapour concentrations above recommended exposure levels may be irritating to the eyes and the respiratory tract, may cause headaches and dizziness, could be anaesthetic and may have other central nervous system effects. |
| Chronic | Prolonged or repeated contact with this material may result in skin irritation leading to dermatitis. |
12. ECOLOGICAL INFOMATION
| Ecotoxicity | No ecotoxicological classifications. |
| Persistence and Degradability | No data available |
| Mobility | No data available |
13. DISPOSAL CONSIDERATION
| Disposal Method | Dispose of waste according to federal, EPA, state and local regulations. Assure conformity with all applicable regulations. |
| Special Disposal Precautions | None allocated. |
14. TRANSPORT INFORMATION:
| UN Number | None allocated |
| UN Proper Shipping Name | None allocated |
| DG Class |
Not classified as a Dangerous Good
according to the Code for the Transport of Dangerous Goods by Road and
Rail. Note: Combustible materials may be classified as Class 9: miscellaneous dangerous goods if transported with flammable materials. |
| Packaging Group | None allocated |
| Hazchem Code | None allocated |
| Special Transport Precautions | None allocated |
15. REGULATORY INFORMATION:
| AICS | All ingredients present on AICS. |
16. OTHER INFORMATION
|
US NFPA Codes
HMIS Codes |
Health Fire Reactivity 0 1 0
Health Fire Reactivity 0 1 0
|
|
| Acronyms | ACGIH | American Conference of Government Industrial Hygienists |
| AICS | Australian Inventory of Chemical Substances | |
| CAS | Chemical Abstracts Service Registry Number | |
| COC | Cleveland Open Cup | |
| DG Class | Dangerous Goods Class | |
| EPA | Environment Protection Agency | |
| Hazchem | Codes of numbers and letters which gives information to emergency services | |
| IP | Institute of Petroleum | |
| NOHSC | National Occupational Health and Safety Commission | |
| SUSDP | Standard for the Uniform Scheduling of Drugs and Poisons | |
| UN Number | United Nations Number | |
CONTACT POINT
| Contact | Laboratory Manager | |
| IMPORTANT DISCLAIMER | All reasonable care has been taken to ensure that the information and advice contained herein are accurate at the time of printing. However, Oberon Manufacturing Co. accepts no tortuous or contractual liability for any loss or damages suffered as a consequence of reliance on the information and advice contained herein. | |
靖玉貿易行銷有限公司
台灣 桃園市 326-46 楊梅區民族路 5 段 201 巷 124 號
TEL : 03-4206896 FAX : 03-4202206 http:www.jingyu.biz
