|Product Name:||Oberon A623||UN Number:||3802|
|Fuel additive containing polymeric detergent and carrier oils in hydrocarbon solvent||
Dangerous Goods Class
and Subsidiary Risk:
|Chemical Name:||Petroleum Product Additive||Hazchem Code:||Not Applicable|
|Use:||Gasoline Additive||Poisons Schedule:||None Assigned|
|CHEMTREC, 24-HOUR EMERGENCY TELEPHONE NUMBER|
|1-800-424-9300 (Toll-free)||For United States and Canada|
|1-703-527-3887||In the event of an incident occurring outside United States and Canada|
|Odour. ………………….………….…||Aromatic Hydrocarbon|
ASTM D97 Pour Point
|Boiling Point Range …......…………||154.44ºC||
|Flash Point (PMCC ASTM D93)……||> 67ºC||
Typical for solvent
|Explosive Limits (in air)……………..||Between 0.6 and 7 vol%||
Typical based on solvent
|Vapour Pressure @ 38oC..………....||0.4 kPa||
Typical for solvent
|Density (15ºC)………………………..||0.878 g/cm3||
ASTM D4052 Typical
|Specific Gravity (15.6/15.6).............||0.879||
|Vapour Density (101.3 kPa/air=1)….||
Greater than Air
|Solubility in Water (° C) …...............||Wt%||
|Is Material Hygroscopic……………..||No|
|Viscosity @ 20ºC…………………...||338.00 cSt||
ASTM D445 Typical
|Viscosity @ 40ºC…………………….||90.00 cSt||
ASTM D445 Typical
|Evaporation Rate (n-Bu Acetate=1).||<0.060|
|COEFF. of thermal expansion (Liq.)||<0.00073 ºC||
Vol/Vol ° C
|Molecular Weight …………………..||
Not Applicable: Blend
COMPOSITION / INFORMATION ON INGREDIENTS
|HEALTH HAZARDOUS COMPONENT||SYMBOL/R-PHRASE OR OEL||Wt%|
|1,2,4 - Trimethylbenzene||Xi, Xn, R10, R20, R36/37/38, R51/53||1.0 – 4.9|
|Solvent Naphtha (Petroleum), Heavy Arom.||Xn, R51/53, R65, R66, R67||10.0 – 19.9|
|Naphthalene||Xn, R22, R50/53||
1.0 – 4.9
PHYSICAL AND CHEMICAL HAZARDS / FIRE
AND EXPLOSION HAZARDS
·1Low hazard. Material can form flammable mixtures or can burn only upon heating to temperatures at or above the flash point.
·2Toxic gases will form upon combustion. [See Fire-Fighting Measures Section.]
FIRST AID MEASURES
|Inhalation:||Using proper respiratory protection, immediately remove the affected victim from exposure. Administer artificial respiration if breathing is stopped. Keep at rest. Call for prompt medical attention.|
|Skin Contact:||Flush with large amounts of water; use soap if available.|
|Eye Contact:||Flush eyes with large amounts of water until irritation subsides. If irritation persists, get medical attention.|
|Ingestion:||If swallowed DO NOT induce vomiting. Keep at rest. Get prompt medical attention.|
FIRE FIGHTING PROCEDURES:
·1Use water spray to cool fire exposed surfaces and to protect personnel. Shut off "fuel" to fire.
·2Use foam, dry chemical, or water spray to extinguish fire.
SPECIAL FIRE PRECAUTIONS:
·1Respiratory and eye protection required for fire fighting personnel.
·2Avoid spraying water directly into storage container due to danger of boil over.
·3See also [First Aid Measure Section] as well as [Stability and Reactivity Section.]
HAZARDOUS COMBUSTION PRODUCTS:
Fumes, smoke, Carbon Dioxide (CO2), Carbon Monoxide (CO) and Oxides of Nitrogen (Toxic)
·1Contain spilled liquid with sand or earth.
·2Recover by pumping (Use an explosion proof or hand pump) or with a suitable absorbent. If liquid is too viscous for pumping, scrape up with shovels or pails and place in suitable containers for recycle or disposal.
·3Consult an expert on disposal of recovered material and ensure conformity to local disposal regulations.
·4See Section on [First Aid Measures] as well as Section on [Stability and Reactivity.]
·1Warn other shipping. Notify port or relevant authority and keep public away. Shut off source if possible to do so without hazard. Confine if possible
·2Remove from surface by skimming or with suitable absorbents. If allowed by local authorities and environmental agencies sinking and/or suitable dispersants may be used in non-confined waters.
·3Consult an expert on disposal of any recovered material and ensure conformity to local disposal regulations.
·4See also Section on [First Aid Measures] and Section on [Stability and Reactivity.]
|Storage Temperature (ºC)||Between 5.0 and 40.0 (recommended range)|
|Transport Temperature (ºC)||Between 5.0 and 40.0 (recommended range)|
|Loading/Unloading Temperature (ºC)||Between 5.0 and 40.0 (recommended range)|
|Viscosity (cSt) :|
|Storage/Transport Pressure (kPa)||Atmospheric|
|Electrostatic Accumulation Hazard?||No, but use proper grounding procedure|
|Usual Shipping containers||Drums, Task Cars/Trucks|
|Materials and coatings suitable||Carbon Steel|
|Epoxy Resin Coated Steel|
|Materials and coatings unsuitable||Polyethylene|
|Natural and Butyl Rubbers|
|Butadiene and Styrene Rubbers|
The use and choice of Personal Protection equipment is related to the hazard of the product, the workplace, and the way the product is handled. In general, we recommend as a minimum safety precaution that safety glasses with side-shields and workclothes protecting arms, legs and body be used. In addition, any person visiting an area where this product is handled or processed should at least wear safety glasses with side-shields.
Based on and limited to Oberon’s experience of this product as such, the following special advice is believed to provide satisfactory protection for the industrial user or handler.
Where concentrations in air may exceed the limits given in this section, it is recommended to use a half face filter mask to protect from overexposure by inhalation. Suitable filter material depends on the amount and type of chemicals being handled in the workplace, but filter material of type "A" or similar may be considered for use.
When handling this product, it is recommended to wear chemical resistant gloves. The choice of suitable protective gloves depends on work conditions and what chemicals are handled, but we have positive experience with gloves made of PVC or Nitrile. Gloves should be replaced immediately if sign of degradation is observed.
When handling this product, it is recommended to wear splash resistant goggles.
When handling this product, it is recommended to wear a chemical resistant apron, jacket and rubber boots.
following advice only applies to the product as supplied.
Combination with other materials may well indicate another route of disposal. If in doubt, contact local authorities.
Empty drums should be taken for recycling, recovery or disposal through a suitably qualified or licensed contractor.
Care should in any case be taken to ensure compliance with national and local regulations.
This product is NOT suitable for disposal by either landfill or via municipal sewers, drains, natural streams or rivers.
This product is ashless and can be burned directly in appropriate equipment.
This product is suitable for energy recovery in appropriate incinerators.
|This product is not regulated for road/rail transport.|
|SEA – IMDG (PACKAGED GOODS AND BLCs)|
|CLASS||: 9||PACKAGING GROUP||: III|
|UN NUMBER||: 3082||MARINE POLLUTANT||: P|
|EMS NUMBER||: F-A, S-F||RISK LABEL||: 9|
|TRANSPORT DOCUMENT NAME:||Environmentally Hazardous Substance, Liquid, N.O.S. (Alkyl (C3-C5) Benzenes), 9, UN 3082, PG III|
|AIR – (ICAO/IATA)|
|This product is not regulated for air transport.|
CLASSIFICATION AND LABELLING ACCORDING TO EUROPEAN DIRECTIVES
CLASSIFICATION / SYMBOL: Not Regulated
GOVERNING DIRECTIVE : Dangerous Preparations Directive 88/379/EC, as modified.
|This information releases only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process. Such information is to the best of OBERON’s knowledge and believed accurate and reliable as of the date indicated. However, no presentation, warranty or guarantee is made as to its accuracy, reliability or completeness. It is the user’s responsibility to satisfy himself as to the suitability and completeness of such information for his own particular use.|
台灣 桃園市 326-46 楊梅區民族路 5 段 201 巷 124 號
TEL : 03-4206896 FAX : 03-4202206 http:www.jingyu.biz
靖玉首頁 OBERON 目錄 STARRY 目錄